The Lead2pass New Microsoft 70-417 practice tests helps the user to keep a check on their learning and understanding and improve for the Microsoft 70-417 exam. Lead2pass makes you pass your exam much easier.
QUESTION 171
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you click View script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?
A. .xml
B. .ps1
C. .bat
D. .cmd
Answer: B
QUESTION 172
You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2. Server1 has the DHCP Server server role and the File Server server role installed.
You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI).
The solution must meet the following requirements:
– Preserve the server roles and their configurations.
– Minimize administrative effort.
What should you do?
A. On Server1, run setup.exe from the Windows Server 8 installation media and select Server with a GUI.
B. Start Server1 from the Windows Server 8 installation media and select Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature.
C. Start Server1 from the Windows Server 8 installation media and select Server with a GUI.
D. On Server1, run setup.exe from the Windows Server 8 installation media and select Server Core Installation.
When the installation is complete, add the Server Graphical Shell feature.
Answer: D
Explanation:
A. Server is on 2008 R2 core, must install 2012 core and then GUI B. Not least effort
C. Not least effort
D. Upgrade to 2012 and install GUI shell
http://technet.microsoft.com/en-us/library/jj574204.aspx Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported. However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes. For more information about these installation options, how to convert between them, and how to use the new Minimal Server Interface and
Features on Demand, see
http://technet.microsoft.com/library/hh831786.
QUESTION 173
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 does not have Internet connectivity. All roles are removed completely from Server1.
You mount a Windows Server 2012 R2 installation image to the C:\Source folder.
You need to install the DNS Server server role on Server1.
Which folder should you use as the source? To answer, select the appropriate folder in the answer area.
![wps88DE.tmp_thumb[3]](http://www.itexamquiz.com/lead2pass/l2pimages/7785ac5f01d3_F839/wps88DE.tmp_thumb3.png "wps88DE.tmp_thumb[3]")
Answer:
![wpsD8C3.tmp_thumb[2]](http://www.itexamquiz.com/lead2pass/l2pimages/7785ac5f01d3_F839/wpsD8C3.tmp_thumb2.png "wpsD8C3.tmp_thumb[2]")
QUESTION 174
You have a server named Server1 that runs Windows Server 2012 R2.
You connect two new hard disks to Server1.
You need to create a storage space that contains the two disks.
The solution must meet the following requirements:
– Provide fault tolerance if a single disk fails.
– Maximize the amount of files that can be stored in the storage space.
What should you create?
A. A spanned volume
B. A parity space
C. A mirrored space
D. A simple space
Answer: C
Explanation:
There’s no mention about a 3rd disk except the OS disk.
This can only be a mirror space.
And, "Simple space"… resilient, really ? No.
"Simple spaces are designed for increased performance when resiliency isn’t very important. They are best suited for temporary data, such as video rendering files, image editor scratch files, and intermediary compiler object files."
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#What_are_the_best_uses_of_simple_mirror_and_parity_spaces
QUESTION 175
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2.
Which command should you run from Server1?
A. winrs -r:server2 netstat
B. dsquery * -scope base -attrip,server2
C. winrm get server2
D. netstat> server2
Answer: A
Explanation:
This command line tool enables administrators to remotely execute most Cmd.exe commands using the WSManagement protocol.
QUESTION 176
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
From Server2, you attempt to connect to Server1 by using Computer Management and you receive the following error message:
"Computer \\Server1 cannot be found. The network path was not found."
From Server1, you successfully connect to Server2 by using Server Manager.
You need to ensure that you can manage Server1 remotely from Server2 by using Computer Management.
What should you configure? To answer, select the appropriate option in the answer area.
Answer:
QUESTION 177
Your network contains an Active Directory domain named adatum.com.
The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the Windows PowerShell 2.0 engine on DC1.
B. Install Microsoft .NET Framework 4 on DC2.
C. Install Remote Server Administration Tools on DC1.
D. Install Remote Server Administration Tools on DC2.
E. Install Windows Management Framework 3.0 on DC2.
Answer: BE
Explanation:
Windows Management Framework 3.0 To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool.
You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above).
QUESTION 178
Your network contains an Active Directory domain named adatum.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Corel, you perform a Server Core Installation of Windows Server 2012 R2.
You join Corel to the adatum.com domain.
You need to ensure that you can use Event Viewer on Server1 to view the event logs on Corel. What should you do on Core1?
A. Install Remote Server Administration Tools (RSAT)
B. Run the Enable-NetFirewallRulecmdlet.
C. Run the Disable-NetFirewallRulecmdlet
D. Install Windows Management Framework.
Answer: B
QUESTION 179
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. Hardware component Configuration:
![wpsE351.tmp_thumb[2]](http://www.itexamquiz.com/lead2pass/l2pimages/7785ac5f01d3_F839/wpsE351.tmp_thumb2.png "wpsE351.tmp_thumb[2]")
You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS).
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.
Which virtual machine setting should you configure for VM2?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: G
Explanation:
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first.
QUESTION 180
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server3. The network contains a standalone server named Server2. All servers run Windows Server 2012 R2.
The servers are configured as shown in the following table.
Server3 hosts an application named App1. App1 is accessible internally by using the URL https://app1.contoso.com. App1 only supports Integrated Windows authentication.
You need to ensure that all users from the Internet are pre-authenticated before they can access App1.
What should you do? To answer, drag the appropriate servers to the correct actions. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer: 
Lead2pass 70-417 Exam will provide you with exam questions and verified answers that simulate the actual exam. These questions and answers provide you with the experience of taking the actual test. Our 70-417 Exam is not just questions and answers. They are your access to high technical expertise and accelerated learning capacity.
http://www.lead2pass.com/70-417.html
